Mon premier blog

One-Board Woodworking Projects: Woodworking from the Scrap Pile Andy Standing
Publisher: Taunton Press, Incorporated

Feb 18, 2014 - Whether you use hand or power tools, traditional or modern joinery techniques, there is one thing all woodworkers have in common; wood – the material we work with. There are three very Rough lumber is sold and measured in 1/4” increments for thickness; when a board is referred to as 4/4, it means that it is 1 inch thick, or four quarters of an inch. I had never tackled a woodworking project prior to buying the jig. The Defense Nuclear Safety Board, which advises the White House, has called these problems “a show-stopper.”. May 4, 2014 - The plywood shelving was also made from random pieces of 1/2" plywood that I had in my scrap pile. The overall spend on the project was under $60. With the one of the big “buzzwords” of the day being “green,” it seems more and more of us are looking for ways to reuse something and (maybe) save a buck in the process. Used to create a thicker edge on the counter top so that it looks better, and the remainder will be used to create ledger boards for the shelves to rest on; 3d 1-1/4" nails for securing the ledger boards; Wood glue - all joints are both screwed and glued. A few days ago some guys were talking about using recycled wood. The most common sizes you It is best to allow some scrap at the end of each board just in case. May 9, 2013 - also part of the Manhattan Project—has been successfully vitrifying weapons waste for years, but only one fuel separation process was used there. Whether the solids pile up in the vessels, the pipes or the filters, says Donna Busche, nuclear and environmental safety manager for Hanford contractor URS Corp., “that's where I've got the problem. I have dismantled many of the latter when I needed a chunk of 2×4 for some shop project but when I see an oak pallet I can't help but think that there's enough wood there for at lease something small… a box or… well… something.